Georgia Contractor Insurance

February 22, 2012 1:45 PM CST

Equipment and products for the masonry industry

By Masonry

Cat TH514 Telehandler

Cat
Peoria, Ill.

With a capacity of 11,000 pounds and a lift height of 45 feet, the Cat TH514 telehandler is ideal for construction, oil rigging and wind farming applications. A limited slip differential in the front axle provides added traction and allows the machine to work effectively in harsh terrain. The telehandler reduces both fuel consumption and heat generation, with a load-sensing variable displacement piston pump that delivers flow on demand. The side-mounted, turbo-charged C4.4 DITAAC mechanical control engine with 101 hp reduces emissions and runs cleaner. A transmission disconnect button on the joystick delivers full engine power to the hydraulics without manually disconnecting the drive.

www.cat-telehandlers.com/th514

Gehl Telescopic Handler Receives Engine Upgrade

Gehl
West Bend, Wis.

Gehl has implemented an engine upgrade on the RS5-19 Telescopic Handler. The EPA certified Interim Tier IV Yanmar 68 hp naturally aspirated engine provides reduced fuel consumption. The upgraded Interim Tier IV engine meets the latest emissions standards. The Gehl RS5-19 is designed with a compact frame and tight turning radius of 11 feet, allowing it to maneuver in low buildings and confined job sites. The RS5-19 is a low-profile machine with an overall height of six feet, four inches, making operating in buildings, under parking garages and in confined areas easy. The boom reaches to a height of 19 feet, one inch, and features the same welded box-section design that is on the proven Gehl Dynalift telescopic handlers.

www.gehl.com

Hyster Unveils Updated H190-H360HD₂ Series

Hyster Co.
Danville, Ill.

Hyster Co. has unveiled its revamped H190-360HD¬¬¬¬¬2 heavy duty pneumatic lift truck series. The series, with lifting capacities of 19,000 to 36,000 pounds, is ideal for precast, concrete and warehouse applications. The series features a standard low-emission Cummins QSB 6.7 Tier 3 industrial diesel engine with turbocharger and intercooler. Adding to the series’ advanced dependability, the Hyster three-speed autoshift transmission allows for precise inching and smooth shifting. The Load Sensing Hydraulic System dramatically reduces fuel consumption by optimizing hydraulic flow to specific need. Hyster’s exclusive VISTA masts and updated right-side dash display optimize operators’ visibility. A multifunction display panel offers 16 warning lights, five gauges and a dual function LCD.

www.hyster.com

KNAACK Lift Kit

Knaack LLC
Crystal Lake, Ill.

Knaack LLC introduces a new Crane Lift Accessory Kit (Model #497) to improve the mobility of jobsite storage equipment. The kit works with the full KNAACK product line to provide secure attachment points, enabling quick and easy strapping and hoisting of jobsite boxes. After the one-time installation, the lift bracket system takes the guesswork out of tying and untying loads for moving, increasing productivity. Storage equipment weighing up to 2,500 pounds can be lifted and carried safely with this tested and secure system. The kit features four heavy-duty carbon steel lift brackets, mounting hardware, and installation instructions. Durability is enhanced with a weather-resistant, black enamel paint finish.

www.knaack.com

Lull 1044C-54 Series II

Lull
McConnellsburg, Pa.

The Lull 1044C-54 Series II telehandler is ideal for general construction, steel erection, masonry or general applications. With a 10,000-pound capacity and 54 feet of lift height, the 1044C-54 Series II delivers fast and easy load placement with the exclusive horizontal load placement system. The telehandler has three steering modes: four-wheel circle, four-wheel crab and two-wheel front, which allows workers to navigate the job site according to terrain conditions. In addition, standard front outriggers provide added operator confidence with increased stability and extra lifting capacity. This telehandler has a variety of attachments for high versatility in handling job site challenges.

www.jlg.com/en-US

Mustang 519 Telehandler Engine Upgraded to Interim Tier IV

Mustang
West Bend, Wis.

Mustang has improved its 519 Telehandler, which now features a powerful Yanmar Interim Tier IV compliant engine. The new 68 hp, naturally aspirated diesel engine meets the latest emission standards. Owners of the Mustang 519 telehandler also will note the upgraded engine uses less fuel, providing a significant overall cost savings. Key features of this upgraded model include a super-compact design and tight turning radius of 11 feet; a strong, welded box-section boom that reaches up to 19 feet, one inch; ability to move more material with a lift capacity up to 5,500 lbs.; and an internal wet disc service brakes and Spring –Applied, Hydraulic-Release parking brakes.

www.mustangmfg.com

Nissan Forklift’s QX Series of Electric Lift Trucks

Nissan Forklift Corp.
Marengo, Ill.

Nissan Forklift Corp.’s QX Series offers safety, efficiency and value. The QX Series of 80-volt electric lift trucks, featuring four models ranging from 4,000- to 6,000-pound capacities, use 80-volt, 100 percent AC power, resulting in fast travel and lift speeds with lower operating costs than comparably sized engine-powered forklifts. The series features a tight turning radius for enhanced maneuverability and low center of gravity for greater capacity retention. The standard regenerative braking system reduces power consumption, allowing for longer operating hours for increased efficiency. Features include programmable PIN access to help prevent unauthorized use; an automatic mast-lock system that prevents mast or fork movement when an operator is not in the seat; and controlled rollback.

www.nissanforklift.com

Scanclimber Mast Climbing Work Platform SC8000

Scanclimber Oy
Pirkkala, Finland

Scanclimber launched the SC8000 mast climbing work platform, which climbs steplessly up the mast to a maximum height of 1,000 feet, using a heavy duty rack-and-pinion system of high-grade steel. It is supported at all four corners of the mast structure, for phenomenal torque resistance. Using “sandwich” construction, the drive unit for the SC8000 is strong, while weighing 850 lbs. The drive unit runs on 19 sets of tandem rollers, evenly spreading the loads into the mast structure through all four corners of the frame. A secondary support frame attached to the top of the drive unit provides for the massive loads and deck lengths.

www.scanclimber.com

About the Author

Masonry magazine is the official monthly publication of the Mason Contractors Association of America (MCAA). The periodical covers every aspect of the mason contractor profession, from equipment and techniques to building codes and standards, training the future masonry labor force, business planning, promoting your business, job interviewing, negotiation and legal issues. Masonry magazine’s content is of interest to anyone involved in masonry, such as management personnel, architects, engineers, building design professionals, construction equipment manufacturers and distributors, brick and masonry dealers, researchers and educators, and allied industries concerned with masonry construction. Read or subscribe to Masonry magazine at www.masonrymagazine.com.

Insurance Links